Home How-To Image Processing Multi-Shot Noise Reduction
Thursday, July 31, 2014

Multi-Shot Noise Reduction

Composite several exposures to practically eliminate noise



As great as digital camera sensors and processors have become at combating noise, this film grain-reminiscent interference can still rear its ugly head at high ISOs and in long exposures. So, reducing excessive noise, or literally improving the signal-to-noise ratio, is as important as ever.

There are plenty of traditional approaches to eliminating noise—from using Photoshop's Reduce Noise filter to standalone programs like Noise Ninja and Neat Image, as well as RAW converters and their noise-reduction features—but all of them risk compromising the image quality by removing actual image-forming detail. That's the real challenge for any kind of noise reduction: separating the signal (the image-forming detail) from the noise.

Since noise is random and changes with every shot, it makes sense that if you made multiple exposures of a scene and all of the actual image-forming detail remained the same from frame to frame, and the noisy pixels would be different in every frame, you could analyze the exposures as a group to better determine which pixels comprise image-forming detail and which ones are just noise. That's the idea behind averaging multiple exposures to first identify and then eliminate noise.

To start, shoot multiple RAW exposures of an unchanging scene that would benefit from significant noise reduction. (RAW is useful because of the additional random pixel changes that occur with JPEG compression.) Next, open those exposures—let's say there are five of them—into separate layers of a single Photoshop file. Then you simply adjust their opacities so they're all equally weighted in the final image.

Think about it: If you set one layer's opacity to 50%, you would effectively remove 50% of the noise from that layer, and where the image-forming pixels match the image-forming pixels of the layer below, they would stay the same. Better still, where the image-forming pixels of that layer overlay noisy pixels from the layer below, you'll reduce the lower layer's noisy pixels by 50%, too. Neat, right?

What you can't do, though, is simply pile layer upon layer and set each one to 50% opacity. You'd waste their noise-reducing power that way. But you also can't just determine a layer's opacity by dividing 100% by the number of layers—in this case, that would mean each of the five layers would be set to 20%.

In actuality, you need to divide a layer's opacity by the number of layers below it, plus one. So, first set the base layer, the image background, to 100% opacity. The second layer would be 50% opacity (100% divided by 2). The third layer would be set to 33% opacity (100% divided by 3), the fourth, 25%, the fifth, 20%, and so on. Zoom in to 100% detail and compare this composited image with a single noisy exposure, and you'll not only see less noise, but the overall appearance will be noticeably crisper and clearer. You'll have reduced noise without compromising any of the image-forming detail—a major feat.

The real caveat, of course, is that all of the image-forming pixels—the detail you want to keep—must remain the same from shot to shot. This means you're limited in the type of photographs this technique will work for—still life, architecture, very still landscapes, anything that doesn't move at all. But when you have a shot that qualifies, make multiple exposures and layer them together in the computer to help reduce noise without compromising detail.

3 Comments

Add Comment

 
 
 

 
  • International residents, click here.
Check out our other sites:
Digital Photo Pro Outdoor Photographer HDVideoPro Golf Tips Plane & Pilot